Apart from Pharmacopoeia grade, we offer commercial pure feed grade Manganese Sulfate.
Manganese Sulfate occurs as a pale-pink, granular powder. It is freely soluble in water, but is insoluble in alcohol.
Specification of Feed grade
Assay as MnSO4-H2O: 98% min
Manganese (Mn): 31.8% min
Lead (Pb): 0.001% MAX
Arsenic (As): 0.0005% MAX
Chloride (Cl): 0.005% max
Water insoluble: 0.05% max
Fineness (pass 250μm): 95%
PACKING
HDPE laminated bags with liner 25/50 kgs. net or Jumbo bags with liner or as required by the buyer.
Manganese Sulphate BP
MnSO4,H2O
DEFINITION
Content
99.0 per cent to 101.0 per cent (ignited substance).
CHARACTERS
Appearance
Pale pink crystalline powder, slightly hygroscopic.
Solubility
Freely soluble in water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Solution S (see Tests) gives reaction of sulphates.
B. Dissolve 50 mg in 5 ml of water. Add 0.5 ml of ammonium sulphide solution. A pale pink precipitate is formed which dissolves on the addition of 1 ml of anhydrous
acetic acid.
C. Loss on ignition (see Tests).
TESTS
Solution S
Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is not more opalescent than reference suspension.
Chlorides
Maximum 100 ppm.
Iron
Maximum 10 ppm, determined on solution S.
Zinc
Maximum 50 ppm.
Heavy metals
Maximum 20 ppm.
Loss on ignition
10.0 per cent to 12.0 per cent, determined on 1.00 g at 500 ± 50C.
British Pharmacopoeia 2009
Manganese Sulphate BP; Manganese Sulfate
MnSO4-4H2O
DEFINITION
Manganese Sulphate is manganese (II) sulphate tetrahydrate. It contains not less than 98.0% and not more than 100.5% of MnSO4, calculated with reference to the
substance ignited at 450 to 500C.
CHARACTERISTICS
Pale pink crystals or crystalline powder.
Freely soluble in water; practically insoluble in ethanol (96%).
IDENTIFICATION
A. Dissolve 0.5 g in 10 ml of water and add 1 ml of sodium sulphide solution. A pink precipitate is produced which is soluble in 6M acetic acid.
B. To 0.1 g add 2 g of lead-(IV) oxide and 5 ml of nitric acid , boil gently for a few minutes, add 100 ml of water and filter. A purple solution is produced.
C. Yields the reactions characteristic of sulphates.
TESTS
Arsenic
4 ppm
Heavy metals
40 ppm
Iron
40 ppm
Zinc
500 ppm
Chloride
330 ppm
Loss on ignition
When ignited to constant weight at 450° to 500°, loses 31.0 to 34.0% of its weight. Use 1 g.
Manganese Sulfate USP
MnSO4·H2O 169.02
Sulfuric acid, manganese(2+) salt (1:1) monohydrate.
Manganese(2+) sulfate (1:1) monohydrate [10034-96-5]
Anhydrous 151.00 [7785-87-7]
Manganese Sulfate contains not less than 98.0 percent and not more than 102.0 percent of MnSO4·H2O.
Identification— A solution (1 in 10) responds to the tests for Manganese 191 and for Sulfate.
Loss on ignition— Ignite it at 450 to constant weight: it loses between 10.0% and 13.0% of its weight.
Substances not precipitated by ammonium sulfide— Dissolve 2.0 g in 90 mL of water, add 5 mL of ammonium hydroxide, warm the solution, and pass hydrogen sulfide
through the solution for about 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a filter, transfer 50 mL
of the clear filtrate to a tarred dish, evaporate to dryness, and ignite, gently at first and finally at 800 ± 25 : the weight of the residue does not exceed 5 mg (0.5%).
MnSO4-H2O Formula wt 169.02
CAS: [7785-87-7]
DESCRIPTION
Manganese Sulfate occurs as a pale-pink, granular powder. It is freely soluble in water, but is insoluble in alcohol.
Function:
Nutrient.
REQUIREMENTS
Identification:
A 1:10 aqueous solution gives positive tests for Manganese and for Sulfate.
Assay:
Not less than 98.0% and not more than 102.0% of MnSO4·H2O.
Arsenic:
Not more than 3 mg/kg.
Lead:
Not more than 4 mg/kg.
Loss on Heating: Between 10.0% and 13.0%.
Selenium:
Not more than 0.003%.
Reagent Chemicals
Manganese Sulfate Specifications
Manganese Sulfate Monohydrate
Manganese (II) Sulfate Monohydrate
Manganous Sulfate Monohydrate
MnSO4-H2O
Formula Wt 169.02
CAS Number 10034-96-5
REQUIREMENTS
Assay: 98.0-101.0% MnSO4-H2O
Loss on ignition: 10.0-12.0%
Substances reducing permanganate: Passes test
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.005%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.005%
Nickel (Ni): 0.02%
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc (Zn): 0.005%
Heavy metals (as Pb): 0.002%
Iron (Fe): 0.002%
